On this page
- What stitches are used in Parsi hand work?
- Why is the khakha called the "forbidden stitch"?
- What thread and cloth is Parsi embroidery worked on?
- What frame and needle do Parsi embroiderers use?
- Is the cloth embroidered before it is cut and sewn?
- Who did the embroidery, Chinese or Parsi hands?
- How long does one piece of Parsi embroidery take?
- Frequently asked questions
Parsi hand work is silk embroidery done entirely with a needle on a silk ground, the work best known from the Parsi gara sari. Museum catalogues that describe 19th and early 20th century pieces name the same few stitches again and again: satin stitch, stem stitch, tiny knots called khakha, and chain stitch made with a small hooked needle called an aari. The thread is silk, often floss silk. The Parzor Foundation records that Chinese embroiderers worked on small frames with curved needles, and that Parsi women learnt by watching them. As for time, the designer Ashdeen Lilaowala told Outlook Traveller in 2023 that a gara sari can take three weeks to two months, with six to eight artisans working on one piece.
શહેરેવર રોજ
Shehrevar Roj, Tir Mah · 1396 Y.Z.
What stitches are used in Parsi hand work?
Satin stitch dominates the record. The Victoria and Albert Museum (V&A) describes a Gujarat child's tunic of about 1867 as embroidered "in twisted silk satin stitch in white, yellow and green". The Penn Museum records a black gauze sari worked mainly in satin stitch, with some stem stitch.
The Parzor Foundation, which runs the UNESCO Parzor project on Parsi heritage, traces satin stitch, long and short stitch and the khakho (seed pearl stitch) to the Tang and Song dynasties (618 to 1279 CE), when, "after interaction between Persia and China", they began appearing with Chinese chain stitch. Later, Parzor writes, Parsi women took up "the aari and mochi stitch", learnt from their Gujarati women friends.
| Stitch | What the record shows | Where it is recorded |
|---|---|---|
| Satin stitch | Twisted silk satin stitch on a child's tunic, Gujarat, about 1867, and satin stitch on a red sari border, early 20th century | V&A 510-1868 and IS.29-2004 |
| Stem stitch | Used with satin stitch on black silk gauze saris | V&A T.24-1967 and Penn Museum A574 |
| Long and short stitch | Traced by Parzor to Persian and Chinese contact, 618 to 1279 CE | Parzor Foundation |
| Khakha (knot or seed stitch) | A whole child's tunic worked "completely in knots" in floss silk | Penn Museum 43-12-100 |
| Peking stitch | Named with satin stitch and knots | Textile Research Centre, Leiden |
| Chain stitch (mochi or aari bharat) | Worked with a small hooked needle on a red tie-dyed jhabla, most likely from Surat | Penn Museum A613 |
Ashdeen Lilaowala summed up the finished effect to Deccan Chronicle in 2014: "We call our work 'Painting with a needle'".
Why is the khakha called the "forbidden stitch"?
The khakha is a tiny knot. The Textile Research Centre (TRC) in Leiden calls it the "(in)famous 'forbidden stitch'", adding that it is "more universally known as the Peking knot". The Penn Museum gives the Gujarati name as khako and describes the stitches as knots or seed stitches. Parzor spells it khakho and calls it the seed pearl stitch.
On the name itself, Parzor's account is that the stitch was so intricate that it "resulted in women losing their eyesight", and so came to be called the forbidden stitch. We found no study that measured this, so we report it as Parzor tells it and go no further.
What thread and cloth is Parsi embroidery worked on?
The thread is silk throughout the museum pieces we read. Penn's red jhabla, most likely from Surat, uses "cream, golden yellow, green, and bright blue floss silk". Its knot-worked tunic is also in floss silk, while its black sari uses twisted two-ply silk. A late 19th century ijar cloth carries a Chinese-style border in "double silk thread", according to its record in Singapore's national collection.
The ground cloth is silk too. The V&A notes that silk gauze "was a favoured material", and that purple and black were common colours. Several V&A children's tunics are embroidered on satin, and one on magenta silk damask. Penn's red jhabla is a satin-weave silk it calls gajji.
Metal thread appears as well. A Surat jhabla of about 1855 at the V&A carries appliqué in silver-wrapped thread with silver-coloured sequins. TRC Leiden says gold-coloured badla decoration became popular in the early to mid-twentieth century, sometimes with sequins sewn onto a net ground.
What frame and needle do Parsi embroiderers use?
Parzor writes that Parsi women learnt from Chinese pedlars by "observing them working on their small embroidery frames", including "their use of curved needles". For chain stitch, the Penn Museum names the tool: "a small, hooked needle called an ari (or aari)".
None of the records we read gives a frame size or a needle gauge. So we don't either.
Is the cloth embroidered before it is cut and sewn?
Often, yes. Several museum garments were embroidered flat and never tailored. The V&A's 1867 tunic is "Complete, untailored (not sewn along sides and collar not cut out)". Another V&A tunic of about 1880 is unfinished, with the sides unsewn and the collar still uncut. One bought at the Great Exhibition of 1851 is catalogued as an "Uncut piece for Parsi girl's blouse".
The RISD Museum in Rhode Island explains why. Its label says the first such garments were made from other embroidered textiles brought back from China, and that Chinese workshops later made uncut embroidered panels to be tailored once they reached home.
Borders were often a separate job. The V&A records that edging on many Parsi pieces "is applied separately", with "yards of satin ribbon" embroidered by Chinese artisans for that purpose. TRC Leiden describes kor as bands "used for sewing on garments, especially saris". It also notes that Chinese hand looms were smaller than Indian ones, so many Parsi saris made from Chinese cloth carry a lengthwise seam where an extra half-width was added: the do-patti (two-strip) sari.
Who did the embroidery, Chinese or Parsi hands?
Both, at different times. The V&A's old register entry for its blue satin tunic of about 1880, "Used by the Parsees of Bombay", ends simply "Chinese. 19th cent." The Penn Museum places its knot-worked jhabla either in China or with "Chinese embroiderers in Surat, Gujarat".
Parzor describes how the skill passed across. Chinese pedlars, "Pherawallas", came "regularly in winters to family homes across Gujarat", and Parsi women who watched them "created their own Garas, Jabhlas and Kors". How the China trade brought the work to India in the first place is covered in the Chinese roots of Parsi embroidery.
At Ashdeen Lilaowala's label, Open magazine reported in February 2025, much of the work happens at "units" between Delhi and Bengal, and he estimates "around 300–350 artisans" work across them.
How long does one piece of Parsi embroidery take?
The only dated figures we could verify come from one working studio, Ashdeen Lilaowala's label, as reported between 2023 and 2025. They vary with the design.
| What was said | Who said it | Where and when |
|---|---|---|
| A gara sari "can take anywhere from three weeks to two months", with "six to eight artisans working on one Gara together" | Ashdeen Lilaowala | Outlook Traveller, 8 August 2023 |
| The embroidery "can take six to eight weeks for a single saree" | Ashdeen Lilaowala | ELLE India, 24 September 2025 |
| Stitched garments too "can take up to three months to embroider", depending on how complex the design is | Sohini Dey, writer | Open magazine, 14 February 2025 |
We could not open a reliable source giving a time for 19th-century pieces, so none is given here.
One note on method. Much of what is written online about gara technique cites nothing. The most exact descriptions we found sit in museum catalogue entries, which is why this article leans on them. For the wider picture of the craft, start with our guide to Parsi embroidery, and for the mix of influences in the designs, see Parsi embroidery as an intercultural mix. If you want to check a piece you own, read how to tell a hand-embroidered Parsi gara from a machine-made one. The same stitches appear on children's clothes, covered in jhablas and ijars.
Frequently asked questions
What is Parsi hand work?
Parsi hand work, which shop listings also call Parsi work, is silk embroidery done by needle on silk cloth, best known from the Parsi gara sari. Museum records name satin stitch, stem stitch, small knots called khakha and hooked-needle chain stitch as its main stitches. Designer Ashdeen Lilaowala describes the finished work as "Painting with a needle".
What is the khakha stitch in Parsi embroidery?
The khakha is a tiny knot, also spelt khako or khakho. The Textile Research Centre in Leiden says it is better known as the Peking knot and calls it the "forbidden stitch". The Parzor Foundation says the name came from women losing their eyesight working it. No study we found has measured that claim.
Is Parsi embroidery done on a frame?
The Parzor Foundation records that Chinese embroiderers worked on small embroidery frames, and Parsi women learnt by watching them, including their use of curved needles. Chain stitch was worked with a small hooked needle called an aari. The records we read give no frame sizes, so we do not state one.
How long does it take to embroider a Parsi gara?
Designer Ashdeen Lilaowala told Outlook Traveller in 2023 that a gara sari takes three weeks to two months, with six to eight artisans on one piece. In 2025 he told ELLE India the embroidery takes six to eight weeks for a single saree. Time depends on the design.
What thread is used for Parsi hand work?
Silk. Museum pieces use floss silk and twisted silk, sometimes two-ply, on grounds of silk gauze, satin or gajji silk. One ijar cloth carries a border in double silk thread. A Surat jhabla of about 1855 carries silver-wrapped thread and sequins, and TRC Leiden records gold-coloured badla work from the early to mid-twentieth century.
PalV's Kasti


